Web Mountain Technologies RUC-01 Manuale Utente Pagina 14

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 15
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 13
Now, click on the button in HW-VSP that says Create COM. You will see the status under VSP change to
“Created” and Status under LAN change to Connected. This tells you that you have made the necessary
connections from your PC in your office to the RUC at the remote location.
Now that you have the networking configured, go ahead and open the ESI GUI software. You will get a
screen that looks like this:
Click on Edit, then COM port, and select the appropriate COM port from the dropdown, in our case
COM8.
Now, you’re ready to start using the software. In this particular case, the Open All and Close All buttons
above will work, but they are sending RP protocol commands. However, you can use the software now
as if you were local to the RUC and ESI equipment.
Once you’re finished with the software, merely close the ESI GUI application, then click on the button
Delete COM in HW VSP. The VSP status will change to Deleted and the LAN status will change to Closed.
Then, just “X” out of HW VSP and you’re done!
Summary
In conclusion, the amount of control you can command is only limited by one’s imagination. The
purpose of this document is not to teach you, the user or installer, how to install or program the ESI
system you should go to their training for that but to show you how you can use the RUC-01 unit as
part of an integrated system to allow different protocols to control each other.
Vedere la pagina 13
1 2 ... 9 10 11 12 13 14 15

Commenti su questo manuale

Nessun commento